There are many fantastic products on the market, but no matter how wonderful they are, you’ll only want to use a few. So we’ve compiled the most helpful hints for locating the ideal product. We’ve investigated all the top-selling items to assist you in making that difficult selection. Here are our top recommendations for the greatest 1200 watt hifonics brutus amp.
Top 10 Best 1200 watt hifonics brutus amp -Tried, Tested and Reviewed
To choose a product, we considered several factors, including quality, materials and durability, and convenience of use. Analyzing products for hours on end. We investigated if 1200 watt hifonics brutus amp was simple to use. We compared them and scored them on a scale to determine the best.
- Brand value
- Consumer ratings, reviews & many more.
- The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an extremely efficient, low temperature, high amplification system that others only dream about.
- The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the music.
- The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.
- Max Power Rating: 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. 1 ohm: 1200 watts x 1 chan.
- Dimensions: 9"W x 13.25"L x 2.5"H, 1-year Manufacturer's Warranty
- Package: Hifonics BXX1200.4 + Complete 4 Channel 4 Gauge Amp Kit
- BXX1200.4: Brutus 1200W RMS 4 Channel A/B Speaker Car Audio Amplifier
- Rating: 4 ohms: 150 watts x 4 channel. / 2 ohms: 300 watts x 4 channel. / 4 ohms, bridged: 600 x 2 channel.
- Variable full/low-pass filter: 50 - 250 Hz, 12 dB/octave / Variable full/hi-pass filter: 120 - 3000 Hz / Variable Bass Boost: 0 to +10 dB bass boost
- Frequency Response: 10 - 45000 Hz / Total Harmonic Distortion (THD): .05% / Signal to Noise Ratio: >90 dB
- Package: Hifonics BXX1200.1D + Complete 4 Gauge Amp Kit
- BXX1200.1D: 1200W RMS Class D Car Subwoofer Amplifier
- Max Power Rating: 4 ohms: 400 watts x 1 channel / 2 ohms: 600 watts x 1 channel / 1 ohm: 1200 watts x 1 channel
- Frequency Response: 10 - 250 Hz / Total Harmonic Distortion (THD): .1% / Signal to Noise Ratio: >95 dB
- Variable low-pass filter: 30 - 250 Hz, 12 dB/octave / Subsonic filter: 15 - 35 Hz / Variable Bass Boost: 0 to +10 dB bass boost
- Angled Terminals for Ease of Access
- 1,200 watts max
- 600 watts x 1 at 2 ohms
- 300 watts x 1 at 4 ohms
- Frequency response: 10 Hz to 500 Hz
- Package Dimensions: 10.6 cms (L) x 27.8 cms (W) x 10.6 cms (H)
- Product Type: Radio
- Package Quantity: 1
- Country Of Origin: China
- 4 Channel Speaker Car Audio Amplifier
- CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.
- BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.
- CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system protection allows you to monitor overload and speaker shortages with illuminated indicators.
- MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.
- HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile, to keep your vehicle looking clean while delivering optimal power.
- 1,300 watts max
- 650 watts x 1 at 2 ohms
- 325 watts x 1 at 4 ohms
- Frequency response: 10 Hz to 500 Hz
- Super Class D technology powered by Ultra-Fi MOSFETs for high power, efficient cooling with minimal distortion
- Power @ 2 Ohms (ch x watts): 4 x 300 | Power @ 4 Ohms (ch x watts): 4 x 150 | Mono Bridged @ 4 Ohms (ch x watts): 2 x 600
- RCA Inputs: Nickel plated high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant.
- Operation Mode: Four Channel, Full Range, Bridgeable, Flexible installation allows this amplifier to run in four channel or bridged mono mode.
- Electronic Equalizer: Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.
- Output Device Technology: PWM MOSFET Power Supply, Stable power through the PC board with minimal heat generation.
Things to consider when buying 1200 watt hifonics brutus amp
When you’re ready to make a purchase, it’s important to know the best products. Whether you’re buying 1200 watt hifonics brutus amp, certain things go into making a decision that will affect your life for years. Here are some things you should consider when making any kind of purchase:
- Price: This is the most obvious thing to consider when buying anything. You want something that has value and quality but is also within your budget.
- Design: The design of 1200 watt hifonics brutus amp will affect how it looks and feels in use.
- Materials: If you’re planning on using something frequently or for long periods, it’s important that the material doesn’t wear out quickly or start getting dirty easily.
- Customer Ratings: Look at how well each product has been rated by other customers who have already bought one themselves! This will give you an idea of whether or not this particular item will be right for your needs or not!
When buying, it’s important that you keep the following in mind:
You should know the type of material that is used in making the product. This will help you determine whether it is durable or not. If you want to buy 1200 watt hifonics brutus amp that will last for a long time, you should consider buying one made from strong materials such 1200 watt hifonics brutus amp. These are very durable materials that are difficult to break or damage.
Of course, price is a factor to consider when making your purchase. The price of 1200 watt hifonics brutus amp is usually determined by the quality and quantity of materials used in its manufacturing. The more expensive products are usually made with higher quality materials and are more durable than the cheaper options. However, there are some exceptions to this rule; for example, you can get good quality products at a lower price if you buy them from an online store or an outlet store.
Before buying 1200 watt hifonics brutus amp, it is advisable that you first check its reviews from previous users and see what they say about it. You can do this by going on Amazon or other similar websites where people post their experiences about various products after using them for some time so that you can know what problems they had before deciding whether or not it would be worth investing in one yourself!
If possible, always look for 1200 watt hifonics brutus amp that come with warranties because this means they have been tested by experts in their respective fields and found worthy enough to warrant a warranty on their behalf which means they will stand behind any defects or malfunctions that may occur during use!
Know your budget
Before looking for anything, know how much money you want to spend on it. This will help narrow down your search and make it easier to find something that fits within your price range. Once you’ve decided how much you want to spend, stick with it! If something costs more than what’s in your budget, don’t buy it. There are plenty of other great options out there for less money.